facebook     logomain3 

 

Home
Overview
Benefits
Customer
Gallery
G3i
Installation
Instructions
Magneto Harness
Conversion to
Auto Plugs
MSD
Reference
Spec.
Supercharging
Air/Fuel
Delivery
Dyno Runs
Order
Price Sheet
Contact Us

 

 


G3i - SYSTEMS OPERATING SPECIFICATIONS

 

G3i MODULE SERIES -SC-E:

  • Number of cylinders (4)

  • Drives 1 magneto in synchronization

  • Aircraft ignition switchable, LEFT, RIGHT, BOTH, START

  • Signal: E/PMAG Ignition, Magneto contact set (points)

  • Optional starting inputs

  • Operating voltage 9 –18 VDC, Negative ground

  • Current requirements: 0.9 AMP/1000RPM.

  • Recommended operating temperature: -40f to +175f

  • Weight and size 3.1 LBS. Foot Print 8.625”L x 5.0”W x 2.25”H

 SC-E Module

G3i MODULE SERIES -1:

  • Modular*

  • Any number of cylinders

  • Drives 2 magnetos in synchronization

  • Aircraft ignition switchable, LEFT, RIGHT, BOTH, START

  • Signal: Contact set (points), Crankshaft trigger

  • Operating voltage 9 –18 VDC, Negative ground

  • Current requirements: 0.7 AMPS.

  • Recommended operating temperature: -40f to +175f

  • Weight and size 1.75 LBS. Foot Print 4.0”L x 6.5”W x 2.25”H

    • *Requires ignition amplifier

 series1

*IGNITION AMPLIFIER:

  • Capacitive discharge, MSD 6 series ignition

  • Multiple spark duration: 20 degrees of crankshaft rotation

  • Operating voltage: 9 –18 VDC, Negative ground

  • Current requirements: Average of 1.0 AMPS/ 1000 RPM

  • Voltage output: Primary 460 – 480 volts

  • Weight and size: 2.75 LBS, 8”L x 3.5”W x 2.25”H

 msd6

G3i MODULE SERIES -2:

  • Complete all in one system including internal filters

  • Any number of cylinders

  • Drives 2 magnetos in synchronization

  • Aircraft ignition switchable, LEFT, RIGHT, BOTH, START

  • Signal: Contact set (points), Crankshaft trigger

  • Operating voltage 9 –18 VDC, Negative ground

  • Current requirements 3.7 AMPS @ 3000 RPM

  • Recommended operating temperature: -40f to +175f

  • Weight and size 4.1 LBS. Foot Print 8.625”L x 6.5”W x 2.25”H

 2334

Timing Options Available:

  • Advance timing control module

  • Start/Retard control module

G3i Series Systems include:

  • Terminal strip hardware & Power toggle switch

  • Electrical hardware for lead connections

  • (2) RG400 coax cables 5ft length, BNC terminated

  • (3) 18-AWG shielded p-leads 5ft length, BNC terminated

  • (2) Magneto modification coil terminal stud hardware kits

  • Additional components and services available

 

 

Home  Overview  Benefits  G3i Install  Mag Mod  MSD Reference  
Customer Gallery  Spec.  Dyno  Order/Pricing   Contact Us

 

mail@g3ignition.com


All work Copyright ©2017 G3I All Rights Reserved